It's An Easy Way to Maintain Manual and Automatic Transmission
It's An Easy Way to Maintain Manual and Automatic Transmission - In vehicles, there are two types of transmissions. The first manual while the one that is now selling hard is an automatic transmission or what is often called Matic. Which is better? It's the same, just depending on your taste. Each transmission has its advantages and disadvantages, including how to care for it to work optimally.
Manual transmission is used first because of the uncomplicated way it works. Manual transmission is considered more reliable because it can deliver power faster. Over time, then comes the dead transmission. This type of transmission is widely preferred because it is considered easier to operate. Yep, the automatic transmission does not have a clutch pedal so it makes car users feel more comfortable when driving, especially in traffic jams.
Well, because of the different performances, the two transmissions also need different maintenance.
Manual Transmission Maintenance
The first part that must be treated is a mechanical clutch. Avoid bad habits such as not pressing the clutch pedal properly during gearshift or rough when removing and pressing. Also, avoid the habit of holding half the clutch when on the climb because it will accelerate wear on the clutch pads. Do not put your foot on the clutch pedal when the car is running because it will accelerate the wear of the clutch.
No less important is to maintain the quality of manual transmission oil that works to lubricate transmission gears, synchromesh, and other components in the transmission house. Quality-preserved manual transmission oil will protect transmission gears, facilitate gearshift, and increase the length of transmission life.
Automatic Transmission Maintenance
Naturally, objects that move or rotate each other will experience wear and tear. Although it has been lubricated with oil, other maintenance steps must also be considered. For example, components in the gearbox of the car engine or the transmission. Because it rubs frequently, grams or powder leftover friction will nest until it risks interfering with its performance.
Therefore, for the performance to increase again, lubricant replacement is usually done according to the interval time of the change. For information, regular lubricant replacement is less than optimal because there are still grams in the gearbox that are not wasted. So it takes a flushing process or cleaning the contortion in the gearbox so that the gearbox workspace is clean to the maximum.
The automatic transmission utilizes oil pressure and a Torque Converter to drive the gearshift. The torque Converter replaces the mechanical clutch and all components inside the transmission are submerged in oil. That is, lubricants play an important role in maintaining the performance of the dead transmission.
Automatic Transmission Fluid (ATF) has the task of lubricating all moving components, both inside the torque converter and the transmission house. In addition, the ATF must also channel high-pressure hydrolytic power to operate the clutch to channel engine power and perform a gearshift.
There are several types of ATF in Toyota cars by the technology applied. Ranging from Dexron II to IV, T-IV, WS, and CVT have different specifications related to fluid viscosity and other performance such as the ability to absorb heat and protect components from friction forces. The use of the wrong ATF will affect the performance of the dead transmission.
Keep in mind, the correct operation guarantees that the car's transmission can work properly without any problems. In addition, periodic service is also the key to car transmission maintenance.